CUT + CO
CUT + CO

Carina Mirabile - June 01 2022

Cut + Co.

In September 2020 Beyond Tools were commissioned by Cut & Co. to supply and install CNC CO2 Laser Machine 500mm x 300mm 50W RSX503050 by Redsail . No more than 10 months later, business owner Ash Vaughan reached out as her business had grown significantly and wanted to upgrade to a larger bed machine. In July of 2021 - Beyond Tools were commissioned to supply and install CNC CO2 Laser Machine 1300mm x 900mm 130W RSX1301390 by Redsail . You can check out business owner Ash Vaughan's Review of the Redsail Laser Cutter in Australian Wood Review here.

Details

Client.  Cut & Co.

Website: cutandco.com.au

Featured Equipment: 
CNC CO2 Laser Machine 1300mm x 900mm 130W RSX1301390 by Redsail

CNC CO2 Laser Machine 1300mm x 900mm 130W RSX1301390 by Redsail

Redsail Dealer: Beyond Tools

Commissioning, Installation + Service Maintenance: Beyond Tools

"I never imagined it would take a mere 10 months for me to upgrade to the larger model."

CNC laser cutting machines are now found in many workshops and used for cutting and engraving signage, templates and components in wood, plywood, acrylic, rubber, leather and paper. I initially purchased the RSX503050 Redsail laser cutter which has a 500 x 300mm desktop to cut costs for my business, Perth Cake Collective. I wanted to make my own cake toppers from acrylic and wood for a fraction of the cost I was purchasing them for. I knew the machine would pay itself off in no time, however it wasn’t long before I realised all the extra products I could create with it. The need for a larger machine was soon evident – I never imagined it would take a mere 10 months for me to upgrade to the larger model.

(from https://www.woodreview.com.au/tools-and-equipment/review-redsail-laser-cutter)

Cut & Co. Images below

Cut & Co. Installations at Karrinyup Shopping Centre, 2021-22

Ash Vaughan writes: With its 1300 x 900mm desktop, the RSX130-1390 is the largest of Redsail’s laser cutting machines and has opened many more doors for not only our new business Cut & Co., but also for my partner’s carpentry-based business, Blu Builders, which is now able to offer extra services to clients.

Redsail CNC CO2 Laser + Routing Equipment 

Review Redsail Range of CNC Equipment. Get in touch with our dealers today via our Dealers link in the footer or review products below.

1300mm x 900mm 130W CNC CO2 Laser Machine RSX130-1390 by Redsail
1300mm x 900mm 130W CNC CO2 Laser Machine RSX130-1390 by Redsail
1300mm x 900mm 130W CNC CO2 Laser Machine RSX130-1390 by Redsail
1300mm x 900mm 130W CNC CO2 Laser Machine RSX130-1390 by Redsail
1300mm x 900mm 130W CNC CO2 Laser Machine RSX130-1390 by Redsail
1300mm x 900mm 130W CNC CO2 Laser Machine RSX130-1390 by Redsail
1300mm x 900mm 130W CNC CO2 Laser Machine RSX130-1390 by Redsail
1300mm x 900mm 130W CNC CO2 Laser Machine RSX130-1390 by Redsail
1300mm x 900mm 130W CNC CO2 Laser Machine RSX130-1390 by Redsail
1300mm x 900mm 130W CNC CO2 Laser Machine RSX130-1390 by Redsail
1300mm x 900mm 130W CNC CO2 Laser Machine RSX130-1390 by Redsail
1300mm x 900mm 130W CNC CO2 Laser Machine RSX130-1390 by Redsail
1300mm x 900mm 130W CNC CO2 Laser Machine RSX130-1390 by Redsail
1300mm x 900mm 130W CNC CO2 Laser Machine RSX130-1390 by Redsail
1300mm x 900mm 130W CNC CO2 Laser Machine RSX130-1390 by Redsail
1300mm x 900mm 130W CNC CO2 Laser Machine RSX130-1390 by Redsail
1300mm x 900mm 130W CNC CO2 Laser Machine RSX130-1390 by Redsail
1300mm x 900mm 130W CNC CO2 Laser Machine RSX130-1390 by Redsail

1300mm x 900mm 130W CNC CO2 Laser Machine RSX130-1390 by Redsail

$19,900.00

Suitable for cutting Wood, Plastic, Paper, Acrylic, Rubber, other non-metal items. Ideal for Industry cutting of Signage and Advertising components, Air Plane / Hobby Models plus more. 130W C02 Laser Tube. No CAD experience is necessary. Includes easy to use CAD Software, Exhaust Fan, Water Cooling System, and Air Pump.

This machine features an open frame configuration rather than a cabinet enclosure. Having this open frame setup, allows the machine to be easily unmounted from this frame allowing it to pass through narrows doors (This is not possible with the cabinet enclosure featured on the standard RS130 machine).

The Cutting Capacity / Thickness is dependent entirely on the material specification (ie. material composition) eg.:

  • Material Country of Origin?
  • Whether the material (MDF / Timber) is Dry / Wet?
  • Whether the material is Old / New?

All materials should be trialed and tested, however, a guide is as follows:

  • Acrylic 0-20mm
  • MDF 0-12mm
  • Ply 0-12mm
  • Pine 0-16mm

    Standard Accessories

    • Laser Engraving Software Package
    • User Manual (CD)
    • Water chiller Pump – CW5200
    • Air exhaust fan
    • Air Pump
    • Communication cable
    • 3 Reflect Optics (installed in the machine)
    • 1 Focus Optics (installed in the machine)
    • 1 Laser tube
    • Rotary attachment for cylinder
    • Motorised up and down platform
    • Honeycomb Table
    • Lightworks Software

    Workshop Requirements:

    • Power: 240V 10Amp 50Hz
    • Odour & Fume Extractor
    • Computer / Laptop
    • Delivery, Install, Commissioning

    Client Work

    Image Credits

    Some user images courtesy of Cut & Co. Perth + Blu Builders, Perth

    500mm x 300mm 50W CNC CO2 Laser Machine RSX50-3050 by Redsail
    500mm x 300mm 50W CNC CO2 Laser Machine RSX50-3050 by Redsail
    500mm x 300mm 50W CNC CO2 Laser Machine RSX50-3050 by Redsail
    500mm x 300mm 50W CNC CO2 Laser Machine RSX50-3050 by Redsail
    500mm x 300mm 50W CNC CO2 Laser Machine RSX50-3050 by Redsail
    500mm x 300mm 50W CNC CO2 Laser Machine RSX50-3050 by Redsail
    500mm x 300mm 50W CNC CO2 Laser Machine RSX50-3050 by Redsail
    500mm x 300mm 50W CNC CO2 Laser Machine RSX50-3050 by Redsail
    500mm x 300mm 50W CNC CO2 Laser Machine RSX50-3050 by Redsail
    500mm x 300mm 50W CNC CO2 Laser Machine RSX50-3050 by Redsail
    500mm x 300mm 50W CNC CO2 Laser Machine RSX50-3050 by Redsail
    500mm x 300mm 50W CNC CO2 Laser Machine RSX50-3050 by Redsail
    500mm x 300mm 50W CNC CO2 Laser Machine RSX50-3050 by Redsail
    500mm x 300mm 50W CNC CO2 Laser Machine RSX50-3050 by Redsail
    500mm x 300mm 50W CNC CO2 Laser Machine RSX50-3050 by Redsail
    500mm x 300mm 50W CNC CO2 Laser Machine RSX50-3050 by Redsail
    500mm x 300mm 50W CNC CO2 Laser Machine RSX50-3050 by Redsail
    500mm x 300mm 50W CNC CO2 Laser Machine RSX50-3050 by Redsail
    500mm x 300mm 50W CNC CO2 Laser Machine RSX50-3050 by Redsail
    500mm x 300mm 50W CNC CO2 Laser Machine RSX50-3050 by Redsail
    500mm x 300mm 50W CNC CO2 Laser Machine RSX50-3050 by Redsail
    500mm x 300mm 50W CNC CO2 Laser Machine RSX50-3050 by Redsail
    500mm x 300mm 50W CNC CO2 Laser Machine RSX50-3050 by Redsail
    500mm x 300mm 50W CNC CO2 Laser Machine RSX50-3050 by Redsail
    500mm x 300mm 50W CNC CO2 Laser Machine RSX50-3050 by Redsail
    500mm x 300mm 50W CNC CO2 Laser Machine RSX50-3050 by Redsail
    500mm x 300mm 50W CNC CO2 Laser Machine RSX50-3050 by Redsail
    500mm x 300mm 50W CNC CO2 Laser Machine RSX50-3050 by Redsail
    500mm x 300mm 50W CNC CO2 Laser Machine RSX50-3050 by Redsail
    500mm x 300mm 50W CNC CO2 Laser Machine RSX50-3050 by Redsail

    500mm x 300mm 50W CNC CO2 Laser Machine RSX50-3050 by Redsail

    $6,400.00
    1300mm x 900mm 130W CNC CO2 Laser Machine RSX130-1390 by Redsail
    1300mm x 900mm 130W CNC CO2 Laser Machine RSX130-1390 by Redsail
    1300mm x 900mm 130W CNC CO2 Laser Machine RSX130-1390 by Redsail
    1300mm x 900mm 130W CNC CO2 Laser Machine RSX130-1390 by Redsail
    1300mm x 900mm 130W CNC CO2 Laser Machine RSX130-1390 by Redsail
    1300mm x 900mm 130W CNC CO2 Laser Machine RSX130-1390 by Redsail
    1300mm x 900mm 130W CNC CO2 Laser Machine RSX130-1390 by Redsail
    1300mm x 900mm 130W CNC CO2 Laser Machine RSX130-1390 by Redsail
    1300mm x 900mm 130W CNC CO2 Laser Machine RSX130-1390 by Redsail
    1300mm x 900mm 130W CNC CO2 Laser Machine RSX130-1390 by Redsail
    1300mm x 900mm 130W CNC CO2 Laser Machine RSX130-1390 by Redsail
    1300mm x 900mm 130W CNC CO2 Laser Machine RSX130-1390 by Redsail
    1300mm x 900mm 130W CNC CO2 Laser Machine RSX130-1390 by Redsail
    1300mm x 900mm 130W CNC CO2 Laser Machine RSX130-1390 by Redsail
    1300mm x 900mm 130W CNC CO2 Laser Machine RSX130-1390 by Redsail
    1300mm x 900mm 130W CNC CO2 Laser Machine RSX130-1390 by Redsail
    1300mm x 900mm 130W CNC CO2 Laser Machine RSX130-1390 by Redsail
    1300mm x 900mm 130W CNC CO2 Laser Machine RSX130-1390 by Redsail

    1300mm x 900mm 130W CNC CO2 Laser Machine RSX130-1390 by Redsail

    $19,900.00

    Article credit : Redsail Australia

    Related Posts